utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more
REPAIR FORM  GET A FREE QUOTE

NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Sever Blockage Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

Sever Blockage Nozzles

FIR™


NozzTeq Severe Blockage Nozzles Fir - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Sever Blockage Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

FIR™ - Description:

FIR™ sewer nozzle is designed for penetrating clogged pipes, ice or remove sand, sludge etc. before root cutting.

The FIR's pointed shape and only one front jet, the FIR™ effectively works its way into the clog or ice, without losing the thrusting power. This is very similar to how a step drill works as it moves forward it opens the blockage.

Because of the shape of the nozzle, it is a good choice to use on blockages due to wet wipes, diapers, or FOG (Fats, Oil, Grease) in the pipe.

The FIR™ sewer nozzle adds much of its power to the propulsion which means that the FIR™ will travel further into the pipe than many other nozzles with three or four front jets.

FIR™ nozzles are made of quality stainless steel.

*Click on the Tabs below to view more information.

Chisel Nozzle (Jets)


NozzTeq Severe Blockage Nozzles Chisel Nozzle - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

Chisel Nozzle (Jets) - Description:

NozzTeq® Chisel Nozzles is a Tier 2 nozzle per NASSCO Standards supplied with exchangeable jet inserts both for front and rear jets. The exchangeable jets allow a perfect match to your jetting unit and matching the units pump capacity. The nozzles can be supplied with jets inserts in harden stainless steel or ceramic jets. If you are using recycling water, we highly recommend the ceramic jets for longer service lifetime.

NozzTeq® Chisel Nozzles is the perfect all-purpose nozzle to break open clogs and remove general debris including grease and light roots. The front of the nozzle is supplied with sharpened edges that will, together with the four front jets, help cut through grease, ice and roots and handle blockages of many types. The multiple front jets penetrate the blockage while the rear jets provide thrust to push nozzle up the pipe.

NozzTeq® Chisel Nozzle is a problem-solving nozzle good to keep in any jetting toolbox. It is designed to break opens clogged pipes and penetrate obstacles. Various sizes are available to work in pipe sizes from 2 inch up to 20 inch.

The Tier 2 Chisel nozzles with exchangeable jets are available for 1/2" up to 1-1/4" hoses.

The Chisel nozzles Tier2 can handle pump pressures up to 3500 PSI.

*Click on Tabs to view more information.

  • Connection: 1/8"
  • Water flow at 100 bar (1450 PSI): 10 l/min (2 US GPM)
  • For recyclers: No
  • Front jets: 1 x 0,6 mm
  • Length x diameter: 1.1 x ø .0.5 inches
  • Max working pressure: 5000 psi
  • Min water flow at 1450 psi: 2 us gpm
  • Pipe dimension: 1"-3"
  • Rear jets: 4 x 0,8 mm
  • Weight: 0.02 lbs.

  • Connection: 1/4"
  • Water flow at 100 bar (1450 PSI): 30 l/min (8 US GPM)
  • For recyclers: No
  • Front jets: 1 x 1,0 mm
  • Length x diameter: 1.37 x ø 0.6 inches
  • Max working pressure: 5000 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 1-1/4"-4"
  • Rear jets: 4 x 1,25 mm
  • Weight: 0.04 lbs.

  • Connection: 3/8"
  • Water flow at 100 bar (1450 PSI): 40 l/min (10 US GPM)
  • For recyclers: No
  • Front jets: 1 x 1,1 mm
  • Length x diameter: 1.75 x ø 0.8 inches
  • Max working pressure: 4350 psi
  • Min water flow at 1450 psi: 10 us gpm
  • Pipe dimension: 2"-6"
  • Rear jets: 4 x 1,5mm
  • Weight: 0.11 lbs.

  • Connection: 1/2"
  • Water flow at 100 bar (1450 PSI): 75 l/min (20 US GPM)
  • For recyclers: No
  • Front jets: 1 x 1,4 mm
  • Length x diameter: 2 x ø 1 inch
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 20 us gpm
  • Pipe dimension: 2"-6"
  • Rear jets: 6 x 1,8 mm
  • Weight: 0.15 lbs.

  • Connection: 3/4"
  • Water flow at 100 bar (1450 PSI): 160 l/min (42 US GPM)
  • For recyclers: No
  • Front jets: 1 x 1,9 mm
  • Length x diameter: 3 x ø1.2 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 42 us gpm
  • Pipe dimension: 2"-8"
  • Rear jets: 6 x 2,4 mm
  • Weight: 0.33 lbs.

  • Connection: 1"
  • Water flow at 100 bar (1450 PSI): 300 l/min (80 US GPM)
  • For recyclers: No
  • Front jets: 1 x 2,5 mm
  • Length x diameter: 3.75 x ø1.5 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 80 us gpm
  • Pipe dimension: 4"-16"
  • Rear jets: 6 x 3,5 mm
  • Weight: 0.06 lbs.

  • Connection: 1-1/4"
  • Water flow at 100 bar (1450 PSI): 300 l/min (80 US GPM)
  • For recyclers: No
  • Front jets: 1 x 2,5 mm
  • Length x diameter: 115 x ø49 mm
  • Max working pressure: 250 bar (3500 psi)
  • Min water flow at 1450 psi: 300 l/min (80 us gpm)
  • Pipe dimension: 100-400 mm (4"-16")
  • Rear jets: 6 x 3,5 mm
  • Weight: 0,5 kg

  • Connection: 1/2"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 3 x m4 (15°) + 1 x m4 (0°)
  • Length x diameter: 2 x 1.2 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 2" - 9"
  • Rear jets: 3 x m6 (25°)
  • Weight: 0.5 lbs.

  • Connection: 1"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 3 x m4 (15°) + 1 x m4 (0°)
  • Length x diameter: 3.75 x 2 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 25 us gpm
  • Pipe dimension: 4" - 12"
  • Rear jets: 6 x m6 (20°)
  • Weight: 0,75 kg

  • Connection: 1-1/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 3 x m6 (15°) + 1 x m6 (0°)
  • Length x diameter: 5.3 x 2.75 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 37 us gpm
  • Pipe dimension: 6" - 20"
  • Rear jets: 6 x 1/8" (20°)
  • Weight: 4.8 lbs.


GET A FREE QUOTE

CALL FOR DEMO

If you have any questions, feel free to contact Instrument Technology Corporation at 800-519-1998. For your convenience, you can request a quote from this site.

Please Call -
800-519-1998

© Instrument Technology Corporation (ITC). All rights reserved.     Website Design by Brymels LLC.     Privacy Policy     Sitemap     Back to top