Pelsue - Axial Ventilators

Axial Ventilator 1320/1420

The smallest of Pelsue's Axial ventilation blowers, the "Baby" is CEESI and CSA certified. The "Baby" adapts an 8" ventilation hose or will adapt a "Babypac15 or 25" which is a one-piece hose canister and 15 or 25 feet of hose. The Model 1320 is 120 VAC but also comes in 12 VDC (Model 1420). This compact, 15 pound, tube shaped little blower provides over 800 CFM and will fit into smaller storage spaces.This Model is also CSA, CEESI Certified.

Axial Ventilator 1325P/1400P

The Model 1325P 120 VAC, electric blower is constructed of a durable, weather resistant, high-impact polyethylene plastic. The CSA and CEESI certified unit will accept any 8" blower duct or our model AIRPAC series. The unit also comes in 12 VDC (model 1400P). Weighing only 15 lbs, the units provide as much as 921 CFM. This Model is CSA, CEESI Certified.

Axial Ventilator 1325D/1400D

These axial steel constructed and powder painted models are our most popular. They are available in either 120 VAC (Model 1325D) or 12 VDC (1400D). These units weigh only 19 pounds, and provide from 922 to 1075 CFM of fresh air. A suction adapter is also available (Model 3003P) for those special applications. The CSA certified model 1325D may be coupled to our 1690D LP heater that together provides fresh warm air. The Model 13253D is our 220 VAC, 50Hz model that is built to CE specifications.

Axial Ventilator 1375D/1475D

These axial "Air-Pacs" are blower, hose, and storage canister all- in-one. The models vary from 120 VAC, 60 Hz to 220 VAC, 50Hz; 15' or 25' of hose stored in canister or our special spacemaker hose. All the models are third party certified by CEESI and all are constructed to CE requirement. The light weight steel constructed blowers are powder painted and provide as much as 668 CFM.

Axial Ventilator 1375P/1475P

These axial "Air-Pacs" are blower, hose, and storage canister all- in-one. The models vary from 120 VAC, 60 Hz to 220 VAC, 50Hz; 15' or 25' of hose stored in canister or our special spacemaker hose. All the models are third party certified by CEESI and CSA and all are constructed to CE requirement. The light weight steel constructed blowers are powder painted and provide as much as 668 CFM.