| Suppliers to the Subsurface Utility Engineering Community |
The PT-25 can operate underground gate valves from 6” to 60” diameter. Torque
control device insures that only enough torque to
turn the valve is present.
The PT-25 is more gentle on valve stems than normal manual operation. The Swivel in head allows operation at up to 15 degrees of misalignment.
The Power head extends up to 28 inches to operate.
The revolution counter gives readout of valve turns to 1/10th of a revolution. The torque setting can be easily checked while valve is turning without excess strain on the valve.
Gauges include pressure, torque, oil temp., and oil filter condition.
Controls include torque, direction, speed, and auxiliary circuit. Oil reservoir holds 19 gallons of hydraulic fluid. Can be mounted across Pick-up bed, in utility box, or trailer mounted.
STANDARD FEATURES:
- All hydraulic motors circuitry built into a single manifold.,
- Twin hydraulic motors rotate bull gear on tapered roller brgs. Better balance. More power.
- All exterior parts powder coat painted for a long lasting finish.
- Permanently lubricated Powerhead frame rolls out on sealed wheels with bearings.
- Has built-in auxiliary hydraulic tool circuit with quick-disconnect couplings.